LED strip FLT 66

Technical characteristics

In stock: Colors:

white daylight, (6000-6500K),

White neutral, (4000-4500K),

Warm white (3000-3500K).

LED strip FLT66 - LED strip based on COB technology, LED chips are located directly on the board without plastic bases. A strip of silicone with phosphor is applied over many LED chips, which gives the effect of a continuous glow, without dark gaps. Luminous flux 1100 Lumens per meter! Tape power 24V.

Advantages of COB LED strip FLT 66 from TM "VERSO":

- soft light that does not “harm the eyes” is provided by uniform illumination with an angle of 170° - perceived by the eye as softer.

- due to the location of the LED chips directly on the board, heat dissipation is improved, which reduces the degradation of the LEDs and extends the service life of the LED strip.

- Uniform glow of the LED strip line and wide beam angle allows placement in shallow profiles - with uniform glow without dark spots.

- for uniform glow of the COB LED strip FLT 66 in aluminum profiles, you can use not too matte diffusers and lenses, which reduces light loss and allows you to get the same amount of light with less consumption.

- good flexibility of the LED strip with smaller bending radii, due to the absence of large solder spots as in SMD LED strips.

- High color rendering index CRI=90Ra, this is high-quality light recommended for counter lighting and for main lighting.

Description of FLT66:

Flexible printed circuit board (tape) with self-adhesive back side.

Available as standard on a white PCB.

The strip can be cut into segments (the cutting line is marked on the LED strip) without losing their functionality.

It is not recommended to use this tape in the bathroom and other rooms with high humidity.

It is also possible to adjust the brightness of the light using a dimmer.

FLT66, FLT 66, FLT-66, FLT66, FLT-66

The expected service life of the LED strip is up to 50,000 hours.

24 months warranty.