LED strip FLT 67

Quick order

Technical characteristics

LED type	COB
Nutrition	12V DC
Number of LEDs per meter	528
Current, A/m	0.83
Power consumption W/m	10
Radiation angle	170
Bobbin, m	5m
Size, mm	8 x 2 mm
Cutting frequency	7.5 mm (cutting points are indicated)
Dust and moisture protection level, IP	IP20-33
Color rendering index CRI	80RA
Luminous flux:
White daylight (6500K)	1050 lm/m
Neutral white (4000K)	1000 lm/m
Warm white (3000K)	950 lm/m

Storage temperature	-40º- +80ºС
Operating temperature	-25º- +50ºС

Colors:

Available: daylight white (6500K), neutral white (4000K), warm white (3000K).

The FLT67 LED strip is based on COB technology, with LED chips located directly on the circuit board without plastic bases. A silicone strip coated with phosphor is applied over the multiple LED chips, creating a continuous glow effect with no dark areas. The strip produces 1000 lumens per meter of light! It runs on 12 volts.

Features of the COB LED strip FLT 67 from TM "VERSO":

LED strip FLT 67 is a professional-grade product.

- Larger crystals mean durability!

- high density of crystals per linear meter - 528 pcs!

- 12 volt power supply

- cutting capacity of only 7.5 mm.

- adhesive tape from "3M".

Advantages of the COB LED strip FLT 67 from TM "VERSO":

- soft light that does not “harm the eyes” is provided by uniform illumination with an angle of 170° - it is perceived by the eye as softer.

- thanks to the placement of LED chips directly on the board, heat dissipation is improved, which reduces LED degradation and extends the life of the LED strip.

- The uniform glow of the LED strip line and the wide beam angle allow for placement in shallow profiles – with uniform glow without dark spots.

- To ensure uniform illumination of the FLT 67 COB LED strip in aluminum profiles, you can use diffusers and lenses that are not too matte, which reduces light loss and allows you to obtain the same amount of light with lower consumption.

- good flexibility of the LED strip with smaller bending radii, due to the absence of large solder spots as in SMD LED strips.

Description of FLT67:

Flexible printed circuit board (tape) with self-adhesive backing.

Available as standard on a white PCB.

The strip can be cut into segments (the cutting line is marked on the LED strip) without losing their functionality.

To use this tape in a bathroom or other room with high humidity, you need to choose the option with moisture protection C8.

It is also possible to adjust the brightness of the light using a dimmer.

FLT67, FLT 67, FLT-67, FLT67, FLT-67

The expected service life of the LED strip is up to 50,000 hours.

24-month warranty

Светодиодные ленты
Tape width	8mm
Brightness, Lm/m	1000
Supply voltage	12V
Consumption, W/m	10
Number of LEDs LED/m	528
LED type	COB

Also buy with this

Touch Dim 4(P) Remote Control

Remote control dimensions, mm 110x52x20 Radio signal frequency: 2.4 GHzControl:1. Master ON – switching on...

559 грн. Ex Tax:559 грн.

Touch Dim 1A Dimmer

Controller dimensions, mm 85x45x23 Remote control dimensions, mm 115x55x19 Nutrition 12-24V DC Working..

932 грн. Ex Tax:932 грн.

Power supply T-10A-12V-120

Блок питания T-10A-12V-120.Общая информация:- Источник питания предназначен для преобразования переменного напряжения электрической сети в..

697 грн. Ex Tax:697 грн.

Set Aluminum profile X2101 + matt diffuser A2101 | 18mm x 13mm

Hot

Inexpensive profile of a simple form, standard sizes. It is used as a consignment note and pendant in interior lighting and on building f..

147 грн. Ex Tax:147 грн.

Light fixture mounting kit + LED Liner steel tape, color: Black

Система LED Linear от TM"VERSO"— это тонкая светящаяся линия, которая растягивается от стены до стены до 12 метров в&nb..

2 131 грн. Ex Tax:2 131 грн.

Surface-mounted remote dimmer Touch K1-B

- Very simple and stylish interface.- Adjustment of brightness/color temperature of the glow using a rotary knob.- Remote (2.4GHz) control (up..

888 грн. Ex Tax:888 грн.