LED STRIP FLT 61

LED STRIP FLT 61

MODEL: FLT 61

Colors:

Available: daylight white (6500K), neutral white (4000K), warm white (3000K).

The FLT61 LED strip is based on COB technology, with LED chips located directly on the circuit board without plastic bases. A silicone strip coated with phosphor is applied over the multiple LED chips, creating a continuous glow effect with no dark spaces. The strip produces 600 lumens per meter of light! It runs on 24 volts.

Features of the COB LED strip FLT 61 from TM "VERSO":

The FLT 61 LED strip is unique due to its small board width – only 5 mm.

- Affordable price.

- 504 crystals per linear meter - provides a uniform glow

- 24 volt power supply, with a narrow board allows you to connect up to 10 meters in one piece.

Advantages of the COB LED strip FLT 61 from TM "VERSO":

- soft light that does not “harm the eyes” is provided by uniform illumination with an angle of 170° - it is perceived by the eye as softer.

- thanks to the placement of LED chips directly on the board, heat dissipation is improved, which reduces LED degradation and extends the life of the LED strip.

- The uniform glow of the LED strip line and the wide beam angle allow for placement in shallow profiles – with uniform glow without dark spots.

- To ensure uniform illumination of the FLT 61 COB LED strip in aluminum profiles, you can use diffusers and lenses that are not too matte, which reduces light loss and allows you to obtain the same amount of light with lower consumption.

- good flexibility of the LED strip with smaller bending radii, due to the absence of large solder spots as in SMD LED strips.

- The narrow board width combined with COB technology allows for use in narrow grooves and shallow profiles. It is therefore ideally combined with the X1201+A1201 aluminum profile.

Description of FLT61:

Flexible printed circuit board (tape) with self-adhesive backing.

Available as standard on a white PCB.

The strip can be cut into segments (the cutting line is marked on the LED strip) without losing their functionality.

To use this tape in the bathroom and other rooms with high humidity, you need to choose the option with moisture protection C8

It is also possible to adjust the brightness of the light using a dimmer.

FLT61, FLT 61, FLT-61, FLT61, FLT-61

The estimated service life of the LED strip is up to 35,000 hours.

2 years warranty.