





- Stock: In Stock
- Model: FLT 13-LR
Available Options
LED strips with IC drivers (current stabilization chips) allow long strips (up to 15–20 meters or more) to be connected in one piece without loss of brightness or the use of amplifiers. Unlike conventional resistor-based strips, where the LEDs dim due to voltage drop at the end of the strip, IC drivers compensate for these drops and maintain the same current on each chip.
Technical specifications
LED type | SMD 2835 |
Number of LEDs per meter | 120 LEDs/m |
Nutrition | 24V DC |
Current, A/m | 0.8 |
Power consumption W/m | 9.6 |
Radiation angle | 120 |
Bobbin, m | 50m |
Size, mm | 8 x 2.4 mm |
Cutting frequency | 4.16 cm (5 LEDs) |
Dust and moisture protection level, IP | IP20-33 |
Color rendering index CRI | 80RA |
Luminous flux: | |
White daylight (6500K) | 1000 lm/m |
Neutral white (4200K) | 950 lm/m |
Warm white (3000K) | 900 lm/m |
Storage temperature | -40º- +80ºС |
Operating temperature | -25º- +50ºС |
Colors:
Available: Neutral white (4000-4500K), Warm white (3000K).
To order: Daylight white
FLT13-LR specificity:
Flexible printed circuit board (tape) with self-adhesive backing.
Available as standard on a white PCB.
| Светодиодные ленты | |
| Tape width | 8 mm |
| Brightness, Lm/m | 950 |
| Supply voltage | 24V |
| Consumption, W/m | 9,6 |
| Number of LEDs LED/m | 120 |
| LED type | SMD |





















