- Stock: In Stock
- Model: FLT 1RGB
Available Options
Technical characteristics
LED type | SMD 5050 RGB |
Number of LEDs per meter | 30 LED/m |
Nutrition | 12V DC |
Current, A/m | 0.6 |
Consumption W/m | 7.2 |
Radiation angle | 120 |
Bobbin, m | 5m |
Size, mm | 10 x 2.4 mm |
Cutting ratio | 10cm (3 LEDs) |
Dust and moisture protection level, IP | IP20-33 |
Color rendering index CRI | 80RA |
Luminous flux: | 140 lm/m |
Storage temperature | -40º- +80ºС |
Temperature of use | -25º- +50ºС |
LED strip FLT1 RGB.
FLT1 RGB is a full-color LED strip with 30 SMD5060 LEDs. RGB LEDs consist of three crystals: red, green and blue. During operation of such a LED, the radiation of the crystals mixes, producing a wide range of shades (approximately 16.7 million colors), including white.
Applications of FLT1 RGB:
It is widely used in decorative lighting of multi-level ceilings, decorative niches, cornices, bar counters, display cases, as well as architectural lighting.
Production of advertising and exhibition structures with illumination.
Furniture lighting (end lighting - glass or acrylic, "contour drawing", etc.).
Relaxation areas or sectors.
FLT1, FLT-1, FLT1, FLT 1, FLT-1, RGB, RZhB
FLT1 RGB specifics:
Flexible printed circuit board (tape) with self-adhesive back side.
Available on different types of printed circuit boards:
traditional (yellow-brown), white; black.
The strip can be cut into segments (the cutting line is marked on the LED strip) without losing their functionality.
It is not recommended to use this tape in the bathroom and other rooms with high humidity.
Color, brightness, program and mode changes are controlled using the Controller.
The expected service life of the LED strip is up to 50,000 hours.
24 months warranty.
Светодиодные ленты | |
Lenght, m | 1м |
Tape width | 10 mm |
Brightness, Lm/m | up to 500 Lm/m |
Напряжение питания | 12V DC |
Consumption, W/m | 7,2 |
Защита (IP) | IP 20-33 |
Количество светодиодов | 30 LED/m |
LED type | SMD 5050 |
Additional Information | |
Warranty | 24 monht |