Menu
Your Cart

Triac-Dim Receiver

Triac-Dim Receiver
Triac-Dim Receiver
-67 %
Triac-Dim Receiver
Triac-Dim Receiver
Triac-Dim Receiver
  • Stock: In Stock
  • Model: KS-Triac-smart
1 350 грн.
450 грн.
Ex Tax: 450 грн.
  • The Triac-Dim receiver is designed to control (on/off, dimming) incandescent lamps, halogen lamps, and specially adapted 220-volt LED lamps.
Control can be carried out using remote controls:
Slip-Dim
Dim-Smart
Dot-Smart
The receiver can be controlled simultaneously by two remote controls. A "learning" function (pairing with different remote controls) is available.
Technical specifications:
Nutrition:110-220 Vac
Power consumption: < 2 W
Maximum load:500 Watts (220V)
Overall dimensions: 125x46x26mm
FrequencyRF 433 MHz
Maximum control distance20m
Training instructions:
Slip-dim in three steps:
1. Select the channel number on the remote control - it should be highlighted by the indicator.
2. Turn on the power of the Triac-Dim receiver and immediately touch the touch SLIP panel once - the light should flash twice and go out.
3. Wait 10 seconds for the "learning" process to complete. Then, control the receiver using the remote control.
DIM-smart in two steps:
1. Using the "CH" button, select the channel on which you want to control this receiver.
2. Turn on the power of the Triac-Dim receiver and immediately press the "B+" button once - the light should flash twice and go out.
The receiver is ready for control.
Dot-smart in one step:
1. Turn on the power of the Triac-Dim receiver, and immediately press the button for a long time until you see the red button indicator light up - the light device should flash twice and go out.
The receiver is ready for control according to the Dot-smart button control instructions.

Write a review

Note: HTML is not translated!
Bad Good
 Мы работаем! +38(050) 395-03-79. Ми працюємо! +38(050) 395-03-79