- Stock: In Stock
- Model: DDL2
DALI SIGNAL DECODER DDL2
MODEL: DDL2
Allows you to control the brightness of LED strips and color temperature (for two-color LED strips).
A unique feature of this decoder is its compatibility with the DALI (DT8) protocol. This modern protocol allows you to connect more devices to a single bus.
Nutrition | 12/24VDC |
Operating temperature | -10º to +40º |
Current | Max 12A, (max 12A per channel) |
Number of channels, output | 1-2 (selected manually) |
Maximum connected devices 12 V | 144W |
Maximum connected devices 24 V | 288W |
Incoming signal | Dali (DT8) |
Dali tire standard | IEC62386 |
Dimensions | 117.5x30x17mm. |
Application:
The decoder converts the signal from Dali controllers and control devices into an analog signal (PWM) for controlling LED products (LED strips, tapes, modules).
The number of output PWM channels is set manually upon connection: using the DIP switch on the decoder body, one of three operating modes is set:
- Dual-color (CCT) tape mode (DT8) – DP1 -OFF + DP2 -OFF
- Single color tape mode - DP1 -ON + DP2 -OFF
- Two single-color tape mode (two addresses) - DP1 -OFF + DP2 -ON
Peculiarities:
- Compact dimensions
- Reasonable price
- Equipped with short circuit and reverse polarity protection.
A unique feature of this decoder is its compatibility with the DALI DT8 protocol. This modern protocol allows for connecting more devices on a single bus. Unlike the previous protocol (DT6), which required two addresses to connect a two-color strip (CCT), the DT8 protocol uses only one address.