Touch dimmer remote control SR-2828

Equipment:

• Radio remote control.
• Instructions.

Compatible with SR-2501S receivers. One SR-2828 remote control can synchronously control an unlimited number of receivers. One SR-2501S receiver can be controlled by up to eight remote controls or other devices (such as the SR-2805R wall-mounted remote dimmer).

Used to control LED strips, modules, and LED bars, AQUA-WHT series floodlights, and Wallwasher floodlights. Powered by 12VDC power supplies, the signal is amplified by the Amd-1 signal amplifier. Controlled by remote control.

Control:

1- Touch button On/Off

2 – Touch zone for brightness control 1-100% (256 steps).

To pair the remote with the receiver: Briefly press the "learn" button on the receiver and immediately press any point on the remote's brightness control touch area. The light source connected to the receiver (e.g., an LED strip) should flash once, indicating that the receiver and remote are synchronized.

Do the same with other receivers, if any.

When the power is turned off and on, the previous mode is restored.