









- Stock: In Stock
- Model: Touch WS Dim-PB
- Wired connection of LED strips.
- It has standard dimensions of 86*86 mm and fits perfectly into a standard socket box.
- Adjusts the brightness of the light with a rotary knob
- Allows you to connect two-color LED strips and adjust the color temperature of the glow.
- A unique feature is the connection of Touch* series remote controls. What
allows for parallel control both from the wall-mounted controller panel and from connected
remote controls (up to 12 remote controls).
These controllers are designed for wired connection of LEDs.
tapes. Powered by 12-48V power supplies, signals are amplified using signal amplifiers.
(AMD-2, AM-4, AM-6).
*To link the Touch series remote control you need:
1. Disconnect the controller from the power supply for at least 10 seconds, and then turn it on.
2. On the remote control, press the power button 3 times within 3 seconds after connecting the controller power (for multi-zone remote controls, press the power button for a specific control zone)
3. If the binding is successful, the LED strip will blink 3 times.
Controller dimensions: 86x86x30 mm
Power supply: 12-48 VDC
Working Current: A max 12A
Operating temperature: -10º - +40Сº
Materials: Glass, polycarbonate
Brightness adjustment range: 0.1%-100%
Dimming curve: Logarithmic
Signal: 2.4Hz (up to 30m)
IP protection: IP20











