Dimmer SR-2805ST

Description:

- Very simple and stylish interface.

- Brightness control using a rotary knob using a logarithmic method from 5-100%.

- Switch on/off by short pressing of the rotary knob.

- Remote (radio) control (up to 20m).

- An unlimited number of signal receivers can be configured for each Dimmer.

The signal receiver is equipped with a push-button output. This allows you to connect a standard doorbell button, which allows you to:

- Turn on/off with a short press;

- Increase/decrease brightness with a long press.

- Ideal for remote control of mono-color, hybrid, and RGB LED strips in conditions where it is not possible to install wired dimmers.

- Recommended for use in cafes, restaurants, shops, private interiors.

- Color: white

Installation.

The SR-2805ST dimmer works with the SR-2501S signal receivers.

An unlimited number of receivers can be configured to one dimmer.

The dimmer is powered by a 3VDC battery (CR2032 or CR2025)

Dimmer dimensions: 86*86*27mm

Radio signal frequency: 434MHZ/868MHZ

Training the dimmer and receiver:

1. Connect the receiver power supply, briefly press the learning button;

2. Then press the rotary knob on the dimmer. If everything went correctly, the LEDs on the receiver will flash once. Repeat this process for all receivers you want to control with the dimmer.