- Stock: In Stock
- Model: DS-01
*On/Off if you briefly (less than 550 milliseconds) touch the surface
*Input/output voltage 12-24V
*Maximum load: 4A (48W at 12V and 96W at 24V)
*To adjust brightness from 1-100% - long touch for more than 3 seconds.
*There is a memory when the power is turned off.
Compact all-in-one size: 16.5mm x D = 18mm
*length of each wire, incoming and outgoing: 1m
Operating principle.
The operating principle of a capacitive switch is based on the existence of an electrostatic field. This field also fills the space around the sensor. When the capacitance in this field changes (by bringing a hand close to the switch), the sensor is triggered and turns on the light.
Application.
Wherever a hidden switch is needed for convenience, to maintain a stylish design, to ensure vandalism resistance:
- Kitchen.
-Bathroom, toilet.
-Laboratories, hospitals.
-Workshops.
-Transport.
- Backlighting of mirrors and furniture.
Installation:
- In a hole D=18mm, surface made of non-conductive materials: wood, glass, plastic.
- Connect according to the markings on the wires.
**When testing, do not hold the sensor in your hand while touching the touch surface.
***Do not install on conductive surfaces.