- Stock: In Stock
- Model: DI-04AB
* Switching modes on the body:
- Door mode. Closed - off / Open - on.
- Hand mode. hand wave - On/Off.
* Two sensors included (can be used with one):
- Door mode: convenient for lockers and wardrobes with two doors – if at least one of them is open, the light is on. If both are closed, the light is off.
- In Hand mode: conveniently placed at different ends of the same work area (for example, lighting in the kitchen) - you can turn the light on/off with either of the two sensors.
*Input voltage 12-24V
*Maximum load: 4A (48W at 12V and 96W at 24V)
*The operating distance is from 0.5 cm to 10 cm.
* Compact dimensions of sensors: only 17*9*7 mm, rectangular sensors with holes for mounting.
*Compact size of the distributor box: 75*15*11mm
*The length of each wire, incoming and outgoing: 1m
Operating principle.
The sensor emits infrared pulses in a specific range and detects their reflection from nearby objects. It does not detect infrared remote controls.
Application.
*In Hand mode - driving where you need to turn the lights on and off without touching the switches:
- Kitchen.
-Bathroom.
-Toilet.
-Laboratories.
-Hospitals.
-Workshops.
* In Door mode to automatically turn on the light when opening the doors:
- Kitchen furniture.
- Wardrobe.
-Warehouse.
Installation:
-Sensors are installed on the surface using miniature screws/nails.
Connection diagram:
**Notes:
- When power is supplied in Door mode, both sensors must be closed.
-When using only one of the sensors, make sure that the second one is not short-circuited.