- Stock: In Stock
- Model: K-LED-2-R
Set "Starry Sky" LED-2R
The "Starry Sky" LED-2R set is a simple and inexpensive solution for creating a starry sky effect in the interior. The light source is equipped with a remote control.
They are used as decorative lighting for the interiors of houses and apartments, as well as public establishments: cinemas, restaurants, etc.
The LED-2R kits include 8 glow programs (with different speed, brightness and flickering sequence, constant glow). The "Running River" and "Comet" effects are possible, making the decorative LED lighting lively and original. Switching programs is done using the RF remote control.
There are two buttons on the remote control:
1-on/off;
2- switching programs.
The range of the radio remote control signal within the line of sight is up to 20 meters. The remote control is powered by a standard 23A 12V battery (supplied in the kit)
In the Led-2R kit - the light source is super-bright 20 mA point LEDs. The standard model has 150 fibers 2 m long. The fiber diameter is 0.75 mm. High-quality Japanese fiber is used, which guarantees good light transmission and brightness at the fiber ends. The highest quality, the service life exceeds 10 years, in our experience more than 20 years .
This set is purely a decorative effect, intended for small areas and low ceilings, and cannot serve as lighting .
More vivid and varied effects are possible when custom-made kits are made from fibres of different diameters and light generators from our range with LED and lamp light sources.
Equipment:
Light generator | "LED 2R" (68 x 130 x 38 mm) | 1 pc. |
Remote control | 1 pc. | |
Adapter | 68 x 50 x 48 mm | 1 pc. |
Light guide point 0.75 mm | 2m | 150pcs. |
*Inside the light source, the fiber is distributed into 5 groups to 5 LEDs in the proportion of 3 white and 2 blue LEDs (standard). That is, the fiber flickers in five groups of 30 light guides. This means that for a good effect during installation, you need to ensure that the dots are mixed as much as possible from different groups, for a better flickering effect and no spot effect.
To order*:
- Other fiber diameters: 0.5mm-2mm;
- Other lengths of light guides: 1-10m (multiples of 0.5m);
- Non-standard LED colors and their combinations as light sources for fiber: Red, green, yellow, warm white. (Standard: blue, daylight white.)