- Stock: In Stock
- Model: K-LED-1
Set "Starry Sky" LED-1
The LED-1 "Starry Sky" set is a simple and inexpensive solution for creating a starry sky effect in the interior.
They are used as decorative lighting for the interiors of houses and apartments, as well as public establishments: cinemas, restaurants, etc.
Glowing according to one program of slow alternating flickering - imitation of the starry sky.
In the Led-1 kit - the light source is super-bright 20 mA point LEDs. The standard model has 150 fibers 2 m long. The fiber diameter is 0.75 mm. High-quality Japanese fiber is used, which guarantees good light transmission and brightness at the fiber ends. The highest quality, the service life exceeds 10 years, in our experience more than 20 years .
This set is purely a decorative effect, is intended for small areas and low ceilings, and cannot serve as lighting. A brighter analogue is the "Starry Sky" LED-3" set, which uses 60mA LEDs.
Even brighter and more varied effects are possible when custom-made kits are made from fibres of different diameters and light generators from our range with LED and lamp light sources.
In certain projects, it is convenient for installation and economical to install many LED-1 "Starry Sky" kits over a large area. Since the light generators are compact in size and can be located in close proximity to the glowing area, which allows saving fiber. They are often located in ceiling spaces with access through inspection, ventilation openings, or through mounting holes of spotlights.
Equipment:
Light generator | "LED 1" (68 x 130 x 38 mm) | 1 pc. |
Adapter | 68 x 50 x 48 mm | 1 pc. |
Light guide point 0.75 mm | 2m | 150pcs. |
*Inside the light source, the fiber is distributed into 5 groups to 5 LEDs in the proportion of 3 white and 2 blue LEDs (standard). That is, the fiber flickers in five groups of 30 light guides. This means that for a good effect during installation, you need to ensure that the dots are mixed as much as possible from different groups, for a better flickering effect and no spot effect.
To order*:
- Other fiber diameters: 0.5mm-2mm;
- Other lengths of light guides: 1-10m (multiples of 0.5m);
- Non-standard LED colors and their combinations as light sources for fiber: Red, green, yellow, warm white. (Standard: blue, daylight white.)
* All non-standard options require approval from our managers, as they require clarification of technical capabilities and cost calculation.