- Stock: In Stock
- Model: KА15-LED-4
Set "Starry Sky" KA15-LED-4
The "Starry Sky" KA15-LED-4 set is a simple and inexpensive solution for creating a starry sky effect in the interior. The light source is equipped with a remote control button on the wire. LED-4 light generators are equipped with high-brightness LEDs.
They are used as decorative lighting for the interiors of houses and apartments, as well as public establishments: cinemas, restaurants, etc.
The fiber in this kit is collected in 15 bundles of 10 fibers and the ends are carefully processed for connecting acrylic diffusers.
The KA15-LED-4 kits include 8 glow programs (with different speed, brightness and flickering sequence, constant glow). The "Running River" and "Comet" effects are possible, making the decorative LED lighting lively and original. Program switching is performed using a control button on a 1.5 m long cable from the light source. (It is possible to manufacture light generators with a longer button cable upon request)
Included in the kitKA15-Led-4 - the light source is super-bright point LEDs 60 mA. In the standard model 150 fibers 2 m long. The fiber diameter is 0.75 mm, High-quality Japanese fiber is used, which guarantees good light transmission and brightness at the ends of the fiber. The highest quality, the service life exceeds 10 years, in our experience more than 20 years.
This set is a purely decorative effect, intended for small areas and low ceilings, and cannot serve as lighting. A less bright analogue is the "Starry Sky" KA15-LED-2" set, which uses 20mA LEDs.
Even more vivid and varied effects are possible when custom-made kits are made from fibres of different diameters, various crystal diffusers and light generators from our range with LED and lamp light sources.
In certain projects, it is convenient for installation and economical to install many "Starry Sky" KA15-LED-4 kits on a large area. Since the light generators have compact dimensions and can be located in close proximity to the place of illumination, which allows saving fiber. They are often located in ceiling spaces with access through inspection, ventilation holes, or through mounting holes of spotlights. But to synchronize programs and control several LED-4 light generators, they must be manufactured using a Master-slave wire system. This is possible for a specific order and requires an individual cost estimate.
Equipment:
Light generator | "LED 4" (68 x 130 x 38 mm) | 1 pc. |
Adapter | 68 x 50 x 48 mm | 1 pc. |
Acrylic diffuser RA-1 | 15 pcs. | |
Light guide point 0.75 mm | 2m, collected in 15 tips of 10 threads | 150pcs. |
*Inside the light source, the fiber is divided into 5 groups of 3 diffusers in a ratio of 9 white and 6 blue (standard). This means that for a good effect during installation, you need to ensure that the dots are mixed as much as possible from different groups, for a better flickering effect and no spot effect.
To order*:
- Other fiber diameters: 0.5mm-2mm;
- Other lengths of light guides: 1-10m (multiples of 0.5m);
- Non-standard LED colors and their combinations as light sources for fiber: Red, green, yellow, warm white. (Standard: blue, daylight white.)
- Manufacturing of LED-4 light generators with a longer button cable (up to 20 meters)
- Production of synchronized light generators.
- Increase/decrease the number of diffusers; Combination of diffusers and point fibers; use of acrylic diffusers of the RA-2 “Lens” type.