- Stock: In Stock
- Model: KА15-LED-3
Set "Starry Sky" KA15-LED-3
The "Starry Sky" KA15-LED-3 set is a simple and inexpensive solution for creating a starry sky effect in the interior. LED-3 light generators are equipped with high-brightness LEDs.
The kits are used as decorative lighting for the interiors of houses and apartments, as well as public establishments: cinemas, restaurants, etc.
The fiber in this kit is collected in 15 bundles of 10 fibers and the ends are carefully processed for connecting acrylic diffusers.
Glowing according to one program of slow alternating flickering - imitation of the starry sky.
The KA15-Led-3 kit - the light source is super-bright 60 mA point LEDs. The standard model has 150 fibers 2 m long. The fiber diameter is 0.75 mm. High-quality Japanese fiber is used, which guarantees good light transmission and brightness at the fiber ends. The highest quality, the service life exceeds 10 years, in our experience more than 20 years.
This set is purely a decorative effect, is intended for small areas and low ceilings, and cannot serve as lighting. A less bright analogue is the "Starry Sky" KA15-LED-1" set, which uses 20mA LEDs.
Even more vivid and varied effects are possible when custom-made kits are made from fibres of different diameters, various crystal diffusers and light generators from our range with LED and lamp light sources.
In certain projects, it is convenient for installation and economical to install many "Starry Sky" KA15-LED-3 kits over a large area. Since the light generators are compact in size and can be located in close proximity to the glowing area, which allows saving fiber. They are often located in ceiling spaces with access through inspection, ventilation holes, or through mounting holes of spotlights.
Equipment:
Light generator | "LED 3" (68 x 130 x 38 mm) | 1 pc. |
Adapter | 68 x 50 x 48 mm | 1 pc. |
Acrylic diffuser RA-1 | 15pcs | |
Light guide point 0.75 mm | 2m, collected in 15 tips of 10 threads | 150pcs. |
*Inside the light source, the fiber is divided into 5 groups of 3 diffusers in a ratio of 9 white and 6 blue (standard. This means that for a good effect during installation, you need to ensure that the dots are mixed as much as possible from different groups, for a better flickering effect and no spot effect.
To order*:
- Other fiber diameters: 0.5mm-2mm;
- Other lengths of light guides: 1-10m (multiples of 0.5m);
- Non-standard LED colors and their combinations as light sources for fiber: Red, green, yellow, warm white. (Standard: blue, daylight white.)
- Increase/decrease the number of diffusers; Combination of diffusers and point fibers; use of acrylic diffusers of the RA-2 “Lens” type.