"Starry Sky" Kit KA15-LED-1

Set "Starry Sky" KА15-LED-1

The "Starry Sky" set KA15-LED-1 is a simple and inexpensive solution for the starry sky effect in the interior. The set includes 15 acrylic diffusers with a scattering effect in the shape of stars.

They are used as decorative lighting for the interiors of houses and apartments, as well as public establishments: cinemas, restaurants, etc.

Glowing according to one program of slow alternating flickering - imitation of the starry sky.
In the Led-1 kit - the light source is super-bright 20 mA point LEDs. The standard model has 150 fibers 2 m long. The fiber diameter is 0.75 mm. High-quality Japanese fiber is used, which guarantees good light transmission and brightness at the fiber ends. The highest quality, the service life exceeds 10 years, in our experience more than 20 years .

The fiber in this kit is collected in 15 bundles of 10 fibers and the ends are carefully processed for connecting acrylic diffusers.

This set is purely a decorative effect, is intended for small areas and low ceilings, and cannot serve as lighting. A brighter analogue is the "Starry Sky" KA15-LED-3" set, which uses 60mA LEDs.

Even more vivid and varied effects are possible when custom-made kits are made from fibres of different diameters, various crystal diffusers and light generators from our range with LED and lamp light sources.

In certain projects, it is convenient for installation and economical to install many "Starry Sky" KA15-LED-1 kits over a large area. Since the light generators are compact in size and can be located in close proximity to the glowing area, which allows saving fiber. They are often located in ceiling spaces with access through inspection, ventilation holes, or through mounting holes of spotlights.

Equipment:

*Inside the light source, the fiber is divided into 5 groups of 3 diffusers in a ratio of 9 white and 6 blue (standard. This means that for a good effect during installation, you need to ensure that the dots are mixed as much as possible from different groups, for a better flickering effect and no spot effect.

To order*:
- Other fiber diameters: 0.5mm-2mm;

- Other lengths of light guides: 1-10m (multiples of 0.5m);
- Non-standard LED colors and their combinations as light sources for fiber: Red, green, yellow, warm white. (Standard: blue, daylight white.)

- Increase/decrease the number of diffusers; Combination of diffusers and point fibers; use of acrylic diffusers of the RA-2 “Lens” type.