The LED Linear system from TM "VERSO" is a thin luminous line that stretches from wall to wall up to 12 meters in length. This type of lighting is fundamentally new and requires a designer approach. It is very important to think through and lay the power leads from the wall in advance, at the design stage. The color and brightness of the glow will depend on the selected LED strip. The steel base strip is shipped in multiples of one meter, and can be cut on site to the size you need. The LED Linear lighting system from TM "VERSO" gives you new opportunities in creating your ideal interior.
Peculiarities:
- Simple and convenient installation.
- Used for direct and hidden lighting, continuous wall illumination.
- convenient for lighting large spaces.
- does not clutter up the space
- stretch strips up to 25 meters.
- High quality components.
- Possibility of use with any LED strip from the TM "VERSO" range.
- Two color solutions: Black and White options.
_____________________________________________________
To make a lamp using LED Linear components from TM "VERSO" you will need:
1. Set of fasteners:
mount #1
mount with connection #2
2. Steel tension tape
3. LED strip. The best option is COB strips ( FLT65 , FLT66 , FLT67 , FLT68 , FLT69), the uniform glow of which is better for interior lighting, more pleasant for the eyes. For longer lengths (more than 5 m), it is recommended to use 24V strips. If necessary, provide power from both sides (it is unacceptable to power one section of the strip from several power supplies!)
4. Power supply. It is selected according to the power consumption of the LED strip. The TM "VERSO" assortment includes quite a lot of options for 12 and 24 volts; moisture-proof, compact.
5. Hardware. The fasteners are equipped with universal metal dowels. But depending on the surfaces to which the lamp will be attached, the installer himself must decide how and with what to fasten the bases. When stretching the steel tape, a fairly large force occurs.
