The most optimal solution for illuminating translucent advertising structures are LED modules . They are especially successful in illuminating complex multiple elements. Such as individual letters, patterns, curved lines.
ChP "Yuzhny Gorod" presents high-quality LED modules TM " VERSO " ideal for advertising production.
The main advantages of LED modules:
- compactness;
- ease of installation;
- economy;
- tightness;
- uniform distribution of light.
Previously, illuminated advertising was illuminated from the inside by fluorescent lamps. And complex curved or small fragments, in which T8 lamps of at least 60 cm in length did not fit, provided for the use of expensive and difficult to replace and long-produced neon lamps. Their service life is 10 times less than the glow resource of LEDs. The cost, especially individually made for this design, neon lamps, is very high. They also could not boast of mechanical strength and moisture resistance. Therefore, manufacturers of advertising signs breathed a sigh of relief when LED modules appeared.
This device is a board with LEDs soldered onto it. This board is filled with epoxy resin in a plastic tray. This achieves complete moisture insulation. Both the board, and the LEDs, and the contact pads of the wires soldered onto the board, are all filled with epoxy resin.
Recently, LED modules in a plastic case have appeared and are gaining more and more popularity. This type looks more aesthetically pleasing. They are manufactured on special machines that stamp the plastic shell of the case directly onto the board with LEDs and wires. Manual labor in the manufacture of such modules is practically excluded. And accordingly, errors and defects associated with this are minimized. Stamped modules are still slightly more expensive than modules of previous generations filled with epoxy. But most likely, due to the increasing serial production, their price will decrease. This has already happened with LED strip . And they will completely displace obsolete positions.
How to choose LED modules?
As with any lighting device, the most important factor is not even the power. But the luminous flux, that is, the amount of emitted light. The largest luminous flux is emitted by white LEDs. They are many times brighter than colored ones. That is why they are used much more often.
In addition to the luminous flux, pay attention to the light scattering angle. This parameter affects the uniformity of light falling on the translucent surface. Typically, for these devices, this angle is 120º or more.
If the light structure should change color, then modules with RGB LEDs are used. They are easily controlled using a controller . Which allows you to change colors, brightness and set color change programs. Such light dynamics attracts attention and favorably distinguishes the structure compared to other signs.
The use of modules together with strips placed in special profiles for LED strips is typical for lighting jewelry stores.
You can buy LED modules TM " VERSO " in our online store Ledshop . Through a simple order form on the website. Or by calling one of our offices. Our managers have the largest experience in working with LEDs in Ukraine. We will recommend, calculate and ship the optimal backlight kit for your product in the shortest possible time.
