Technical characteristics
| LED type | SMD 2835 |
| Number of LEDs per meter | 60 LED/m |
| Nutrition | 12V DC |
| Current, A/m | 1 |
| Consumption W/m | 12 |
| Radiation angle | 120 |
| Bobbin, m * | 5m |
| Size, mm | 10 x 4.5 mm |
| Cutting ratio | 5cm (3 LEDs) |
| Dust and moisture protection level, IP | IP67 |
| Color rendering index CRI | >80RA |
| Luminous flux: | |
| White daylight, (6000-6500K)** | 1260 lm/m |
| White neutral, (4000-4500K)** | 1200 lm/m |
| Warm white, (3000-3500K)** | 1140 lm/m |
| Storage temperature | -40º- +80ºС |
| Temperature of use | -25º- +50ºС |
Colors:
Available: Daylight White
*IP68 LED strips are shipped only in 5m reels (price is per 1m)
**The silicone coating shifts the color temperature upward by approximately 500K.
Thus, the IP68 LED strip with LEDs of color temperature 6500K actually produces about 7000K
Description of FLT 93C:
Flexible printed circuit board (tape) with self-adhesive back side.
Available as standard on a white PCB.
The strip can be cut into segments (the cutting line is marked on the LED strip) without losing their functionality.
IP68 protection is provided by a silicone tube with silicone filler. The ends are fitted with plugs.
The set includes 14 silicone clips and 5 silicone caps
It is also possible to adjust the brightness of the light using a dimmer.
Application of LED strip FLT 93C:
It is recommended to use this tape in the bathroom and other rooms with high humidity.
On facades and for pool lighting, provided that all contact groups are sufficiently sealed.
These are tapes with the highest level of dust and moisture protection. An ideal solution for placement on building facades.
It is also possible to use it in swimming pools. With additional and thorough sealing of the beginnings
and the ends of the sections can be submerged under water to a depth of 1 meter. (Contacts, in place
The soldering of wires to the tape is also filled with silicone gel. And, accordingly, protected from moisture penetration.
The buyer is responsible for the tightness of the terminations (At the time of installation to the wires and
The caps may be subjected to stress that causes cracks in the silicone gel.
Which, if immersed for a long time, can lead to corrosion on the ends of the tapes).
FLT93, FLT-93, FLT 93, FLT93, FLT-93
The expected service life of the LED strip is up to 50,000 hours.
1 year warranty.
Also buy with this
