WALL-REMOVABLE REMOTE CONTROL TOUCH MC-5(P)-W

Remote control Touch Mc-5(P) is designed to control receivers - dimmers Touch RGB-4S-Res; Touch RGBW-4S-Res, Touch MC-4S-Res, Touch RGB-4M-Res; Touch RGBW-4M-Res, Touch MC-4M-Res,

Functionally duplicates the Touch Dim-4(P) remote control for one receiver or group.

There is a choice of body colors for every taste:

White - TOUCH MC-5W(P)

Gray - TOUCH MC-5G(P)

Black - TOUCH MC-5B(P)

The highlight of the design of this controller is a magnetic mount between the base, which is mounted on the wall and the remote control itself. Thus, the remote control can be easily used as a wall-mounted and as a portable remote control with an original design.

Controller dimensions, mm

D=70x24mm

Radio frequency:

2.4GHz

Food

3V, AAA batteries*2pcs

Sleep consumption

0.1W

Use temperature

-20º - +60Сº

Maximum radio signal radius

30m

materials

Plastic

*When the power is turned off, the mode that was before is restored.

An unlimited number of receivers-controllers, lamps-signal receivers can be installed on each channel of the remote control.

The signal receiver-controller can be controlled simultaneously by up to four remotes.

Control:

On - turn on.

- long press (until the indicator light flashes twice) - enter the dynamic color change control mode. Then scroll through the modes by briefly pressing the On button (9 modes in total). If you do not move for more than 3 seconds, you will exit the dynamic color change control mode.

Off - short press - turn off, long press - night mode 5% brightness.

Button 1 - one short press - brightness adjustment (default, if not touched for more than 3 seconds. Next, adjust with the touch ring.

- double short press - adjust the color saturation. Next, adjust using the touch ring.

Button 2 - one short press - adjust the color temperature. Next, adjust using the touch ring.

- double short press - color selection. Next, adjust using the touch ring.

Receiver Compatibility:

- RGB (3 channels) lighting: Touch RGB 4S-res, Touch RGB 4M-res

- RGBW (4 channels) lighting: Touch RGBW 4S-res, Touch RGBW 4M-res

- Multicolor(5 channels) lighting: Touch MC 4S-res, Touch MC 4M-res

ATTENTION: Initially, it may be necessary to configure the remote control to the receiver. To do this, immediately after connecting the power to the receiver, press the ON sensor 3 times within 3 seconds. The lamp should make three smooth flashes, which means that the connection between the receiver and the remote control is established. If this does not happen, then turn off the power of the lamp and repeat the procedure after 10 seconds.

To delete the established connection between the receiver and the remotes, immediately (within 3 seconds) after connecting the power to the receiver, press the ON sensor, five times in a row for 3 seconds, after that the lamp should make 10 light flashes - this means the connection of the receiver with the remote control removed.

*When batteries are installed (and within 3 seconds after) do not touch the sensors. Otherwise, weak sensitivity will be observed, in this case, reinstall the batteries.

Additional functions:

- PWM frequency change (8000Hz/ 500Hz)

-Ability to set the mode in which the light will not turn on if the power supply is lost and reappeared. Relevant for our country. To Activate: 1.Press the OFF button three times within three seconds.2. Then press the ON button three times. 3. To confirm activation, the light should flash briefly four times.

Application:

Used to control decorative and functional interior lighting.

Equipment:
Controller, instruction.