DALI DECODER DDL5-1(DT8)

A feature of this decoder is the work in the DALI DT8 protocol.

This is a modern protocol that allows you to connect more devices on the same bus.

Unlike the previous one (DT6), in which 4 addresses had to be used to connect, for example,

an RGBW tape, in the DT8 protocol only one address is used for this.

Power supply 12/24VDC Working temperature -10º to +40º

Current Max 20A, (max 6A per channel)

Number of channels, output 1-5 (selected manually)

Maximum connected devices 12V 240W

Maximum connected devices 24V 480W

Incoming Dali signal (DT8)

Dali bus standard IEC62386-102,207,209

Dimensions 130x49x27mm.

Application: The decoder converts the signal from Dali controllers and control devices into an analog signal (PWM) to control LED products (LED strips, LED strips, modules) by flooding the Wallwasher floodlight. The number of PWM output channels is set manually when connected: using the button on the decoder case, its operating mode is set: 1 channel for mono-color LED products, 2 channels for CCT, 3 channels for RGB, 4 channels for RGBW, 5 channels for MC (Multicolor) , RGB + CCT. Peculiarities: - The digital screen simplifies the work of setting up the system. - the ability to choose a logarithmic or linear curve for changing brightness. - Ability to connect a button (call type) for easy on/off or brightness adjustment