Receiver-dimmer Touch Dim-mini

Receiver-dimmer Touch Dim-mini

Turns on/off and regulates the brightness of light sources.

Controlled by all Touch series remote controls ( except Touch Dim-1A )

The body is made of durable plastic.

Power supply is connected using terminals (included).

Application:

Used to control LED strips, modules, lines, spotlights. Powered by 12-24VDC power supplies, signal amplification using the AMD-2 signal amplifier.

Advantages of the Touch Dim mini model :

- Ultra-compact dimensions

- versatility - works with a wide range of Touch series remote controls from TM VERSO.

- retransmission and synchronization of the signal - this is necessary in cases where receivers are located over a large area or length (facades, streets, long corridors, large halls and rooms...)

- Supports connection to 12 remote controls simultaneously.

*To pair with the remote control you need:

Option 1. Press the SET button on the receiver – then press (within 3 seconds) 3 times the button to turn on the corresponding channel on the receiver.

Option 2. Turn off the power of the receiver, then connect it - then press (within 3 seconds after connecting) 3 times the power button of the corresponding channel on the receiver.

As confirmation, the connected LED strip will flash slowly 3 times.

**Unbinding the remote control - the same steps, but press the remote control 5 times. As confirmation, the connected LED strip will flash quickly 10 times.