SPI-1-mini controller

SPI -1- mini controller

If you want to surprise your guests and add some dynamics to the usual switching on of light, then you will need the LED strip FMT-32NW(IC) from TM"VERSO" and the SPI -1- mini controller .

The simplest controller for controlling the intelligent LED strip SPI-1-mini with dynamic effects such as "running lights".

The controller is designed to control single-color SPI LED strips, for example Smart LED strip FMT-32NW(IC) from TM "VERSO".

Supports products on control chips: WS2811, WS2812, UCS1903

The maximum number of controlled pixels is 2048. (for the FMT-32NW(IC) tape it is 100 meters)

The main purpose is to create dynamic switching on/off of the LED strip, for this there are 4 modes to choose from. Also, the controller has 15 dynamic modes that can be used in advertising, decorative design of counters and premises.

Technical specifications:

• 4 dynamic switching modes
• 15 dynamic modes;
• up to 100 meters of LED strip connection;
• Setting on the controller body
• Turn on/off using a standard household switch.
• Minimum consumption
• Compact dimensions.

SPI -1- mini controller Connects to the LED strip using a standard three-pin connector (if necessary, use an extension cord or solder longer wires). The controller receives power from the LED strip.

Permissible supply voltage 5-24V.

Two free wires are connected to a standard switch. A closed circuit turns on the LED strip, an open circuit turns it off.

*ATTENTION! Do not connect power to free wires - this will disable the controller.

The compact size allows the controller to be installed under the switch in a standard socket box.

During installation, you will need to configure the settings using the buttons on the controller body. According to the instructions, you need to set the required number of control pixels, brightness and speed of dynamic effects.

*If a dynamic effect is required in parallel-synchronously on several circuits and from one controller, then the AM4-SPI-mini signal amplifier will be required.