DI-03AB-3 Dual-mode sensor for 3 sensors

* Switching modes on the body:

- Door mode. closed-off/open-on.

- Hand mode. hand wave - On/Off.

*From one to three sensors:

- In Door mode: convenient for cabinets and wardrobes with two or three doors - if at least one of them is open, the light is on. All are closed - the light is off.

- In Hand mode: conveniently placed at different ends of one work area (for example, lighting in the kitchen) - you can turn on/off the light with any of the sensors.

*Input voltage 12-24V

*Maximum load: 8A (96W at 12V and 192W at 24V)

*The operating distance is from 0.5cm to 10cm.

* Compact dimensions of sensors: only 16x16 mm, removable mount with holes for screws. When installed in a surface - the diameter of the mounting hole is 16 mm.

*Compact size of the distributor box: 61*46*22mm

*Length of each sensor wire: 2m

Operating principle.

The sensor emits infrared pulses in a certain range and perceives their reflection from nearby objects. Does not perceive the action of infrared remote controls.

Application.

*In Hand mode - driving where you need to turn on and off the lighting without touching the switches:

- Kitchen.

-Bathroom.

-Toilet.

-Laboratories.

-Hospitals.

-Workshops.

* In Door mode to automatically turn on the light when the doors are opened:

- Kitchen furniture.

- Wardrobe.

-Warehouse.

Installation:

-Sensors are installed on the surface using miniature screws/nails.

Connection diagram:

**Notes:

- When power is supplied in Door mode, both sensors must be closed.

-When using only one of the sensors, make sure that the second one is not short-circuited.